Metal buildings Colorado property owners trust — that’s what Amsteel Midwest delivers. We coordinate delivery and installation of tubular steel, cold formed steel, and red iron buildings along the Front Range, with Project Advisors serving the Denver metro, the Pikes Peak region, and Northern Colorado. Colorado’s acreage markets are exceptional — horse country in Elbert County, the Palmer Divide communities east of the Springs, and the fast-growing towns of NoCo — full of buyers who appreciate a straight answer over an automated quote.
Most metal building dealers offer one structural system and tell you it’s the best one. We offer three — and we’ll tell you honestly which one fits your Colorado project based on your width, your use case, your local permitting situation, and what matters most to you.
Which Type of Metal Building Fits Your Colorado Project?
Tubular Steel — Our Most Popular System
Tubular steel is our highest-volume product and the system our Project Advisors know best. At 30’–40′ wide, a properly spec’d tubular building delivers an excellent result at a price point that works for the majority of our buyers, and it remains viable through 60′ wide for agricultural applications. Foam closures, rat guard trim, rake edges, and gutter packages can all be added for a clean finished appearance, with headered eave wall openings up to 20′ wide. Site-specific engineering runs approximately $2.00 per square foot when required.
Cold Formed Steel — Finished Buildings, Municipalities, and Barndominiums
Cold formed steel comes standard with foam closure systems, soffit options, upgraded trim packages, rat guard trim, rake edges, gutter packages, and standing seam roof options — properly sealed eaves from the start. It handles clear spans up to 60′ wide at approximately 15′ on center standard column spacing, and site-specific engineering runs approximately $0.75 per square foot — significantly less than tubular when engineering is required. In Colorado, where permits and engineered drawings are the norm nearly everywhere, that engineering cost difference makes cold formed the frequent total-cost winner for barndominiums, residential shells, finished workshops, and permitted projects.
Red Iron — 60’+ Spans, Large Door Openings, and Commercial Applications
Red iron pre-engineered structural steel is the standard for buildings 60′ wide and above and for commercial or industrial applications requiring door openings wider than 20′. At 25’–30′ on center standard frame spacing, red iron delivers wide open bay configurations for large equipment facilities, indoor riding arenas, commercial buildings, and agricultural structures.
Not sure which system fits your Colorado project? Read our complete comparison guide: Tubular Steel vs. Cold Formed Steel vs. Red Iron — or call us and we’ll work through it with you directly.
Colorado Permitting — What You Need to Know
Colorado building codes are locally adopted and locally enforced — and unlike the southern plains states, Colorado counties run active building departments. That makes engineering the first line item on nearly every project:
- Counties enforce building codes. Elbert, Adams, Weld, Larimer, and El Paso Counties all run building departments with adopted I-codes for unincorporated ground, and cities and towns enforce their own — expect a permit and engineered drawings on most structures anywhere on the Front Range.
- The Pikes Peak region runs through one office: the Pikes Peak Regional Building Department handles El Paso County and most of its cities — a single, predictable process we know well.
- Snow load is the headline engineering issue, and it moves with elevation — the Palmer Divide communities (Monument, Falcon, Peyton, Elizabeth) carry loads well above the metro baselines. Address-specific ASCE 7 analysis is standard practice, not an upsell.
- Front Range wind design runs high, with special wind regions along the foothills carrying some of the highest design values in the country.
- Agricultural exemptions are narrower than in Kansas, Oklahoma, or Texas — many counties still require permits or ag affidavits for farm structures. We confirm your county’s current process.
- Frost-depth foundations (30″–36″ footings) are standard and affect site prep and concrete budgets statewide.
- Any structure regularly occupied by people — barndominium shells, workshops, light commercial — is Risk Category II and requires site-specific engineering.
Amsteel Midwest runs the ASCE 7 hazard tool against your specific project address, provides all engineered drawings and documentation, and advises on your jurisdiction’s requirements before you finalize your design. Installation is coordinated through manufacturer install networks for tubular buildings and referred professional installers for cold formed and red iron projects.
Colorado Communities We Serve
Denver CO Metro Area
Metal Buildings Denver CO — Elbert, Adams & Weld Counties
- Metal Buildings in Elizabeth, CO — Elbert County
- Metal Buildings in Bennett, CO — Adams & Arapahoe Counties
- Metal Buildings in Brighton, CO — Adams & Weld Counties
- Metal Buildings in Fort Lupton, CO — Weld County
Colorado Springs CO Area
Metal Buildings Colorado Springs CO — El Paso County
- Metal Buildings in Falcon, CO — El Paso County
- Metal Buildings in Peyton, CO — El Paso County
- Metal Buildings in Monument, CO — El Paso County
- Metal Buildings in Fountain, CO — El Paso County
Fort Collins CO Area
Metal Buildings Fort Collins CO — Larimer & Weld Counties
- Metal Buildings in Wellington, CO — Larimer County
- Metal Buildings in Berthoud, CO — Larimer & Weld Counties
- Metal Buildings in Severance, CO — Weld County
- Metal Buildings in Eaton, CO — Weld County
Talk to a Project Advisor About Your Colorado Project
Whether you know exactly what you want or you’re just starting to think through your options, a conversation with one of our Project Advisors is the most efficient path to the right answer. We’ll ask about your site, your use case, your local requirements, and your budget — and give you a straight recommendation.
- Call us: 417-218-8348
- Email: sales@amsteelmidwest.com
- Submit a project inquiry here
- Design your building online
Frequently Asked Questions — Metal Buildings Colorado
What is the best type of metal building for Colorado?
Colorado’s near-universal engineering requirements change the usual answer. Because permits and engineered drawings apply to most projects, cold formed steel — with site-specific engineering at roughly $0.75 per square foot versus about $2.00 for tubular — is the frequent total-cost winner for garages, finished workshops, barndominium shells, and permitted projects across the Front Range. Tubular steel stays competitive on smaller certified buildings and qualifying agricultural structures where county processes allow. Red iron is the standard for 60’+ spans, indoor riding arenas, and door openings wider than 20′. Call us and we’ll give you a straight recommendation for your specific project.
Does Colorado require permits for metal buildings?
In nearly all cases, yes. Colorado counties run active building departments — unlike much of the southern plains — and cities enforce their own codes, with engineered drawings required on most structures. Agricultural processes exist but are narrower than in Kansas, Oklahoma, or Texas. The Pikes Peak region consolidates permitting through one regional office. We advise on your specific address before you finalize your design.
What metal building sizes are most popular in Colorado?
Our most popular configurations are 30×40 and 30×50 for residential and small agricultural buyers, with larger agricultural and commercial operations frequently requesting 40×60 through 60×80. Browse our full inventory here.
Amsteel Midwest | 1014 E Broadway St, Bolivar, MO 65613 | 417-218-8348 | sales@amsteelmidwest.com
Metal Buildings in Kansas | Metal Buildings in Oklahoma | Metal Buildings in Texas | View Inventory | Contact Us
