Cheyenne sits at about 6,060 feet in Laramie County at the junction of I-80 and I-25 — the state capital and largest city, and one of the windiest inhabited places in the country. Chinook downslope winds off the Front Range routinely produce 80-to-100 mph gusts here, so wind, not snow, is the governing design factor across the southeast; ground snow load is a moderate 25 to 30 psf. Laramie County and the City of Cheyenne both enforce building codes, while the surrounding Platte and Goshen county ranch land is far less regulated.
Which Metal Building Fits Your Cheyenne-Area Project?
Cold Formed Steel — Permitted Shops and Barndominiums
The right call for occupied, permitted buildings inside Cheyenne and Laramie County — finished shops, garages, and barndominium shells, engineered and wind-rated for the corridor. Site-specific engineering runs about $0.75 per square foot, well below tubular where a stamp is required.
Tubular Steel — Ranch and Utility Value
The value leader for hay barns, equipment sheds, livestock shelters, and RV cover under 60′ wide on rural Platte and Goshen county acreage, where a building code may not apply. We still engineer every one for the wind — it’s non-negotiable in this part of the state.
Red Iron (PEMB) — Commercial and Wide Spans
For commercial and industrial buildings, warehousing along the interstate corridors, and any clear span past 60′ or door opening wider than 20′.
Not sure which system fits? Read our complete comparison guide: Tubular vs. Cold Formed vs. Red Iron — or call us and we’ll work through it with you.
Communities We Serve in Southeast Wyoming
- Metal Buildings in Laramie, WY — Albany County
- Metal Buildings in Wheatland, WY — Platte County
- Metal Buildings in Torrington, WY — Goshen County
- Metal Buildings in Pine Bluffs, WY — Laramie County
Talk to a Project Advisor About Your Cheyenne Project
Whether you know exactly what you want or you’re just starting to think it through, a conversation with one of our Project Advisors is the fastest path to the right answer. We’ll ask about your site, your wind exposure, your use case, which city or county has jurisdiction, and your budget — and give you a straight recommendation.
- Call us: 417-218-8348
- Email: sales@amsteelmidwest.com
- Submit a project inquiry here
- Design your building online
Frequently Asked Questions — Metal Buildings Cheyenne
How much wind does a building in Cheyenne need to handle?
A lot — Cheyenne is among the windiest inhabited places in the country, with chinook downslope gusts reaching 80 to 100 mph. Wind governs the design here, so we run the ASCE 7 hazard tool against your exact address to size framing and anchorage properly.
Does Cheyenne enforce building codes?
Yes. The City of Cheyenne and Laramie County both run building departments and enforce codes, unlike much of rural Wyoming. Surrounding Platte and Goshen county land is generally far less regulated. We confirm your parcel’s jurisdiction before design.
← Back to Metal Buildings Wyoming
Amsteel Midwest | 1014 E Broadway St, Bolivar, MO 65613 | 417-218-8348 | sales@amsteelmidwest.com
Other Wyoming areas: Casper | Gillette | Rock Springs | Jackson | Riverton